It can be a day when you start your computer, and you are in the order of a hearing computer with the words "INSERT SYSTEM DISK" or that welcomes a variety of spelling. It is likely that the hard drive went down.
And that's what you're doing to go around and replace the hard drive. At first had to remove the PC case. In both cases you have a PC chassis without tools, or at worst, you'll need a screwdriver. I can not really sayHow to remove the computer case, since there are thousands of different designs. But you can not do it.
Then you must determine whether an IDE or SATA, which is to have for Serial ATA. If the hard drive is that big table that fits into the computer case (that is, as a motherboard) with a ribbon cable, there is probably an IDE hard disk. They are building a new need. In both cases you get from a traditional retailer or online retailer.
If the cable is round instead of a tapeCable, you have a SATA hard drive. So you would need a dealer or traditional or an online retailer go out and buy one of these. Should go, remove the old and the new hard drive. Secure with locking mechanism that is both the computer case with screws or function card. Connect the cable is a ribbon cable or a round of SATA cables.
Then you can install the operating system. We are running on the assumption that the computer will,The OS boot from CD when it is your CD-ROM or DVD-ROM drive.
Otherwise, make an attempt to enter the BIOS, there should be instructions on how to access the configuration screen when you boot your computer and select CD-ROM as first boot device and save the settings and try again.
0 comments:
Post a Comment